$156.0 Buy It Now or Best Offer
free,30-Day Returns
Seller Store hurricanewindpowercom
() %,
Location: Roanoke, Virginia
Ships to: US,
Item: 251340237049
Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Xantrex:Xantrex
Power Source:Solar
C60:C60
MPN:C60
Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel Xantrex C Series – C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Standard Features Silent Microprocessor Control All C Series controllers (C35, C40 & C60) have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers (C35, C40 & C60) all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers (C35, C40 & C60) automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries’ actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60’s can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series (C40) will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate micro hydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers (C35, C40 & C60). UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers (C35, C40 & C60) are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are “real world” and do not have to be derated to comply with USA NEC 125% overcurrent requirements. LCD Digital Display (Optional) CM, CMR/50, CMR/100 -A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included. If used with a wind turbine, this will only measure voltage. Temperature Compensation BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. Warranty Two years workmanship and materials. Specifications Model C35 C40 C60 Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC (100% continuous duty cycle), #6 AWG (90 °C rated) General Specifications Maximum Peak Current85 amps intermittently-electronically protectedMaximum Voltage Drop 0.30 volts -charge control mode Total Current Consumption While operating – 15 ma (typical), at idle – 3 ma (tare) Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM). Regulation Adjustment Settings Charge Control Mode Setup for: Lead Acid Battery 12 Volt Configuration: Float 12.5 – 14.5 VDC Bulk 13.0 – 15.0 VDC EQ +1 VDC above Bulk 24 Volt Configuration: Float 25.0 – 29.0 VDC Bulk 26.0 – 30.0 VDC EQ +2 VDC above Bulk 48 Volt Configuration: Float 50.0 – 58.0 VDC Bulk 52.0 – 60.0 VDC EQ +4 VDC above Bulk NiCad Type Battery (VDC above adjustment setting) Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC) Load Control Mode Low Voltage Reconnect (LVR) – Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting. Low Voltage Disconnect (LVD) – Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting. Standard Features Status Indicator Multicolor LED indicates the operating/battery voltage status Low Voltage disconnect (Load Control Mode) User selectable manual or automatic reconnection – includes warning flash before disconnect and provides a “grace” period. Equalization Charge (Charge Control Mode) User selectable manual or automatic equalization (every 30 days) Short Circuit Protection Fully electronically protected with auto-reset Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected) Options LCD Meter Panel (CM, CMR/25 CMR/50, CMR/100) Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25′ (7.5 m) of cable. CMR/50 includes 50′ (15 m) of cable, CMR/100 includes 100′ (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. External Battery Temperature Sensor (BTS/15, BTS/35) Provides automatic adjustment of the charge control setpoints to the battery temperature. BTS/15 is supplied with 15′ (4.5 m) of cable, BTS/35 cable length is 35′ (11 m) Physical Enclosure Type Indoor, ventilated, powder-coated steel with 3/4″ and 1″ knockouts Specified Temperature Range 32 to 104 °F (0 to +40 °C) Allowed Temperature Range -67 to 167 °F (-55 to +75 °C) Altitude Limit (operating) 15,000 feet (5,000 meters) Altitude Limit (non-operating) 50,000 feet (16,000 meters) Dimensions (H x W x D) C35: 8″ x 5″ x 2.5″ (20.3 cm x 12.7 cm x 6.35 cm) C40, C60: 10″ x 5″ x 2.5″ (25.4 cm x 12.7 cm x 6.35 cm) Mounting Vertical Wall Mount Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg) Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg) Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant, Designed to CTIK Standards. Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!Trace / Xantrex Auction for C60 Model only other models discussed for line comparison of PWM / Diversion load controllerShown with optional Meter see other auctions Xantrex C Series – C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Standard FeaturesSilent Microprocessor Control All C Series controllers (C35, C40 & C60) have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers (C35, C40 & C60) all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers (C35, C40 & C60) automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries’ actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60’s can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series (C40) will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers (C35, C40 & C60). UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers (C35, C40 & C60) are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are “real world” and do not have to be derated to comply with USA NEC 125% overcurrent requirements. LCD Digital Display (Optional) CM, CMR/50, CMR/100 -A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included. If used with a wind turbine, this will only measure voltage. Temperature Compensation BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. Warranty Two years workmanship and materials. Specifications Model C35 C40 C60 Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC (100% continuous duty cycle), #6 AWG (90 °C rated) General Specifications Maximum Peak Current 85 amps intermittently-electronically protected Maximum Voltage Drop 0.30 volts -charge control mode Total Current Consumption While operating – 15 ma (typical), at idle – 3 ma (tare) Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM). Regulation Adjustment Settings Charge Control Mode Setup for: Lead Acid Battery 12 Volt Configuration: Float 12.5 – 14.5 VDC Bulk 13.0 – 15.0 VDC EQ +1 VDC above Bulk 24 Volt Configuration: Float 25.0 – 29.0 VDC Bulk 26.0 – 30.0 VDC EQ +2 VDC above Bulk 48 Volt Configuration: Float 50.0 – 58.0 VDC Bulk 52.0 – 60.0 VDC EQ +4 VDC above Bulk NiCad Type Battery (VDC above adjustment setting) Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC) Load Control Mode Low Voltage Reconnect (LVR) – Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting. Low Voltage Disconnect (LVD) – Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting. Standard Features Status Indicator Multicolor LED indicates the operating/battery voltage status Low Voltage disconnect (Load Control Mode) User selectable manual or automatic reconnection – includes warning flash before disconnect and provides a “grace” period. Equalization Charge (Charge Control Mode) User selectable manual or automatic equalization (every 30 days) Short Circuit Protection Fully electronically protected with auto-reset Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected) Options LCD Meter Panel (CM, CMR/25 CMR/50, CMR/100) Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25′ (7.5 m) of cable. CMR/50 includes 50′ (15 m) of cable, CMR/100 includes 100′ (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. External Battery Temperature Sensor (BTS/15, BTS/35) Provides automatic adjustmentt of the charge control setpoints to the battery temperature. BTS/15 is supplied with 15′ (4.5 m) of cable, BTS/35 cable length is 35′ (11 m) Physical Enclosure Type Indoor, ventilated, powder-coated steel with 3/4″ and 1″ knockouts Specified Temperature Range 32 to 104 °F (0 to +40 °C) Allowed Temperature Range -67 to 167 °F (-55 to +75 °C) Altitude Limit (operating) 15,000 feet (5,000 meters) Altitude Limit (non-operating) 50,000 feet (16,000 meters) Dimensions (H x W x D) C35: 8″ x 5″ x 2.5″ (20.3 cm x 12.7 cm x 6.35 cm) C40, C60: 10″ x 5″ x 2.5″ (25.4 cm x 12.7 cm x 6.35 cm) Mounting Vertical Wall Mount Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg) Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg) Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant, Designed to CTIK Standards. Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials. On Oct-22-13 at 17:27:47 PDT, seller added the following information: Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=1) Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel Trace / Xantrex Auction for C60 Model only other models discussed for line comparison of PWM / Diversion load controllerShown with optional Meter see other auctions Xantrex C Series – C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Standard FeaturesSilent Microprocessor Control All C Series controllers (C35, C40 & C60) have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers (C35, C40 & C60) all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers (C35, C40 & C60) automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries’ actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60’s can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series (C40) will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers (C35, C40 & C60). UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers (C35, C40 & C60) are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are “real world” and do not have to be derated to comply with USA NEC 125% overcurrent requirements. LCD Digital Display (Optional) CM, CMR/50, CMR/100 -A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included. If used with a wind turbine, this will only measure voltage. Temperature Compensation BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. Warranty Two years workmanship and materials. Specifications Model C35 C40 C60 Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC (100% continuous duty cycle), #6 AWG (90 °C rated) General Specifications Maximum Peak Current85 amps intermittently-electronically protectedMaximum Voltage Drop 0.30 volts -charge control mode Total Current Consumption While operating – 15 ma (typical), at idle – 3 ma (tare) Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM). Regulation Adjustment Settings Charge Control Mode Setup for: Lead Acid Battery 12 Volt Configuration: Float 12.5 – 14.5 VDC Bulk 13.0 – 15.0 VDC EQ +1 VDC above Bulk 24 Volt Configuration: Float 25.0 – 29.0 VDC Bulk 26.0 – 30.0 VDC EQ +2 VDC above Bulk 48 Volt Configuration: Float 50.0 – 58.0 VDC Bulk 52.0 – 60.0 VDC EQ +4 VDC above Bulk NiCad Type Battery (VDC above adjustment setting) Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC) Load Control Mode Low Voltage Reconnect (LVR) – Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting. Low Voltage Disconnect (LVD) – Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting. Standard Features Status Indicator Multicolor LED indicates the operating/battery voltage status Low Voltage disconnect (Load Control Mode) User selectable manual or automatic reconnection – includes warning flash before disconnect and provides a “grace” period. Equalization Charge (Charge Control Mode) User selectable manual or automatic equalization (every 30 days) Short Circuit Protection Fully electronically protected with auto-reset Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected) Options LCD Meter Panel (CM, CMR/25 CMR/50, CMR/100) Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25′ (7.5 m) of cable. CMR/50 includes 50′ (15 m) of cable, CMR/100 includes 100′ (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. External Battery Temperature Sensor (BTS/15, BTS/35) Provides automatic adjustmentt of the charge control setpoints to the battery temperature. BTS/15 is supplied with 15′ (4.5 m) of cable, BTS/35 cable length is 35′ (11 m) Physical Enclosure Type Indoor, ventilated, powder-coated steel with 3/4″ and 1″ knockouts Specified Temperature Range 32 to 104 °F (0 to +40 °C) Allowed Temperature Range -67 to 167 °F (-55 to +75 °C) Altitude Limit (operating) 15,000 feet (5,000 meters) Altitude Limit (non-operating) 50,000 feet (16,000 meters) Dimensions (H x W x D) C35: 8″ x 5″ x 2.5″ (20.3 cm x 12.7 cm x 6.35 cm) C40, C60: 10″ x 5″ x 2.5″ (25.4 cm x 12.7 cm x 6.35 cm) Mounting Vertical Wall Mount Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg) Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg) Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant, Designed to CTIK Standards. Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials. On Oct-22-13 at 17:27:47 PDT, seller added the following information: Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application FREE! Sellers: Add a FREE map to your listings. FREE! Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! Trace / Xantrex Auction for C60 Model only other models discussed for line comparison of PWM / Diversion load controllerShown with optional Meter see other auctions Xantrex C Series – C35, C40 & C60 Charge Controllers A Controller for Virtually any DC Charging Source The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60. All three of these fully solid state, microprocessor-driven controllers are UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Standard FeaturesSilent Microprocessor Control All C Series controllers (C35, C40 & C60) have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently. PWM Charge Performance C Series controllers (C35, C40 & C60) all use Pulse Width Modulation (PWM) charging profiles which are designed to provide a full charge to your battery while, at the same time, minimize gassing which can shorten battery life. 3-Stage Battery Charging All C Series controllers (C35, C40 & C60) automatically initiate a 3-stage battery charging cycle. Bulk, Absorption, and Float modes are used to ensure that voltage and current settings accurately match the batteries’ actual state of charge. This means fast-as-possible charging and extended battery life. An auto equalize mode can be easily switched off when the controller is used with sealed batteries. C Series controllers are factory set for solar PV battery charging operation. Field Adjustable There are a number of field configurable, user adjustments for C Series controllers. C35 and C60’s can only be set for 12 or 24 VDC operation. The C40 may be configured for 12, 24 or 48 volt systems. Bulk and Float voltage set points are user adjustable which allows use with a wide variety of battery technologies including; flooded lead acid, gel, and absorbed glass mat. In addition, there are manually selectable settings for Nicad batteries. DC Load Controller Mode When used as a load controller, the C Series (C40) will automatically turn a DC load on or off at predetermined battery voltage settings. Both LVD (low voltage disconnect) and LVR (low voltage reconnect) set points are user adjustable. DC Diversion Mode In this mode, all power, which is not used to maintain a full charge on the batteries, is diverted to a load dump such as water or space heaters. Diversion mode is used to regulate microhydro and wind turbine systems which need a constant load. LED Status Indicator A simple to read, multi-color LED indicates operating status and is standard on all C Series controllers (C35, C40 & C60). UL and cUL Listed C Series controllers are listed by UL to exacting UL 1741 and cUL CSA 22.2 107.1-95 standards. C Series controllers (C35, C40 & C60) are also CE compliant (European countries) and are designed to CTIK standards (Australia). Their current ratings are “real world” and do not have to be derated to comply with USA NEC 125% overcurrent requirements. LCD Digital Display (Optional) CM, CMR/50, CMR/100 -A back-lit meter which continuously displays: battery voltage, DC amperage, cumulative amp hours and amp hours since last reset. CM mounts on front of C Series, C35, C40 and C60, charge controllers. The remote meters CMR/50 and CMR/100 use simple telephone type plug-in connectors. 50 ft. (15 m) or 100 ft. (30 m) cable included. If used with a wind turbine, this will only measure voltage. Temperature Compensation BTS/15 or BTS/35 Monitors battery temperature and adjusts charging voltage for maximum performance. A 15 ft. (4.5 m) or 35 ft. (11 m) cable with standard telephone type connectors is included. Warranty Two years workmanship and materials. Specifications Model C35 C40 C60 Voltage Configurations 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC Maximum PV Array Open Circuit 55 VDC 55 VDC 125 VDC 125 VDC 125 VDC 55 VDC 55 VDC Charging/Load Current @ 25 °C 35 amps DC continuous 40 amps DC continuous 60 amps DC Continuous Recommended Breaker Size With Recommended Wire Size in Conduit 60 amps DC, #6 AWG 60 amps DC, #6 AWG 60 amps DC (100% continuous duty cycle), #6 AWG (90 °C rated) General Specifications Maximum Peak Current85 amps intermittently-electronically protectedMaximum Voltage Drop 0.30 volts -charge control mode Total Current Consumption While operating – 15 ma (typical), at idle – 3 ma (tare) Charge Regulation Method Solid state, 3-stage (Bulk, Absorption and Float) Pulse Width Modulation (PWM). Regulation Adjustment Settings Charge Control Mode Setup for: Lead Acid Battery 12 Volt Configuration: Float 12.5 – 14.5 VDC Bulk 13.0 – 15.0 VDC EQ +1 VDC above Bulk 24 Volt Configuration: Float 25.0 – 29.0 VDC Bulk 26.0 – 30.0 VDC EQ +2 VDC above Bulk 48 Volt Configuration: Float 50.0 – 58.0 VDC Bulk 52.0 – 60.0 VDC EQ +4 VDC above Bulk NiCad Type Battery (VDC above adjustment setting) Float or Bulk (add 2 VDC) Float or Bulk (add 4 VDC) Float or Bulk (add 8 VDC) Load Control Mode Low Voltage Reconnect (LVR) – Subtract 1 V (for 12 VDC systems), 2V (for 24 VDC systems), and 4 V (for 48 VDC systems) from the Bulk setting. Low Voltage Disconnect (LVD) – Subtract 2 V (for 12 VDC systems), 4 V (for 24 VDC systems), and 8V (for 48 VDC systems) from Float setting. Standard Features Status Indicator Multicolor LED indicates the operating/battery voltage status Low Voltage disconnect (Load Control Mode) User selectable manual or automatic reconnection – includes warning flash before disconnect and provides a “grace” period. Equalization Charge (Charge Control Mode) User selectable manual or automatic equalization (every 30 days) Short Circuit Protection Fully electronically protected with auto-reset Field Adjustable Control Setpoints (test points provided for high accruacy) Two user adjustable voltage setpoints for control of loads or charging sources (settings retained if battery is disconnected) Options LCD Meter Panel (CM, CMR/25 CMR/50, CMR/100) Back-lit, 2-line, 32 character, alpha numeric liquid crystal display panel for remote (CMR/XX) or front mounting (CM) on the C Series controller. CMR/25 includes 25′ (7.5 m) of cable. CMR/50 includes 50′ (15 m) of cable, CMR/100 includes 100′ (30 m) of cable. Displays: battery voltage, DC amperage, cumulative amp hours, amp hours since last reset. External Battery Temperature Sensor (BTS/15, BTS/35) Provides automatic adjustmentt of the charge control setpoints to the battery temperature. BTS/15 is supplied with 15′ (4.5 m) of cable, BTS/35 cable length is 35′ (11 m) Physical Enclosure Type Indoor, ventilated, powder-coated steel with 3/4″ and 1″ knockouts Specified Temperature Range 32 to 104 °F (0 to +40 °C) Allowed Temperature Range -67 to 167 °F (-55 to +75 °C) Altitude Limit (operating) 15,000 feet (5,000 meters) Altitude Limit (non-operating) 50,000 feet (16,000 meters) Dimensions (H x W x D) C35: 8″ x 5″ x 2.5″ (20.3 cm x 12.7 cm x 6.35 cm) C40, C60: 10″ x 5″ x 2.5″ (25.4 cm x 12.7 cm x 6.35 cm) Mounting Vertical Wall Mount Weight (Controller only) C35: 2.5 lbs (1.2 kg), C40: 3.0 lbs (1.4 kg), C60: 3.0 lbs (1.4 kg) Weight (Shipping) C35: 3.0 lbs (1.4 kg), C40: 3.5 lbs (1.6 kg), C60: 3.5 lbs (1.6 kg) Certifications UL Listed to UL 1741 and CSA 22.2 107.1-95. CE Compliant, Designed to CTIK Standards. Warranty All C35, C40 and C60 controllers are warrantied for two years against defects in workmanship and materials. On Oct-22-13 at 17:27:47 PDT, seller added the following information: Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application FREE! Sellers: Add a FREE map to your listings. FREE!
Frequently Asked Questions About Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel in My Website
tonisaptoadi.com is the best online shopping platform where you can buy Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel from renowned brand(s). tonisaptoadi.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling Xantrex C60 Charge Controller 60A, 12/24V Wind Generator, Hydro and Solar Panel on tonisaptoadi.com?
tonisaptoadi.com helps you to shop online and delivers Christian Louboutin to your doorstep. The best-selling Christian Louboutin on tonisaptoadi.com are: Christian Louboutin Satin Lipstick * RON RON 310 * FULL SIZE (T) Christian Louboutin Black Leather Crystal Embellished Flats Sz 8 EU 38.5 (AS/IS) Christian Louboutin Rouge Louboutin On The Go Lipstick Soft Goji Travel Size New Christian Louboutin Lip Matte Lipstick * SURVIVITA (T) Christian Louboutin heels size 41.5 Christian louboutin Lace 1EN8 Mary Jane Pumps, Size 40 CHRISTIAN LOUBOUTIN Lady Peep 150 Black Patent Platform Pumps- Size 38.5 (US 8) Christian Louboutin Beige Patent Pigalle Pumps Size 39 sz 8.5 / 38.5 Christian Louboutin So Me Spike Black Leather Ankle Sandal Shoes Christian Louboutin SO KATE Pumps Christian Louboutin Spike Me Follies Glitter Size 38 US 7 High Heels Spikes CHRISTIAN LOUBOUTIN Enamel Loafers Black Round Toe Ribbon Size 35 2406R* Christian Louboutin KATE PLUME 100 Studded Camo Suede Heels Pumps Shoes Size 37 Christian Louboutin Sneakers Shoes Spiked Crystals Leather – Size EUR 44 / US 11 Christian Louboutin Cabata Tote Printed Patent Mini Red Bottom VWG 341755 Christian Louboutin Womens Isabelle 20th Anniversary Espadrille Wedges White Bla Christian Louboutin Beige Cork Lady Peep Toe Platform Pumps Size 38.5 Christian Louboutin Blade Runana 100 Denim Ankle Cuff Heels (Size 40) christian louboutin heels so kate 120 size 40 Christian Louboutin Turquoise Butterfly Crystal Margarita 100 Heels EU 40 CHRISTIAN LOUBOUTIN 60mm Pointed Toe White Patent Leather & PVC Pumps Size 41.5 Christian Louboutin Dos Noeud 120 Black Satin Peeptoe Pumps size 39 Women 5.0US Rare Christian Louboutin High Heels Black Enamel Lined From japan Rare2Find CHRISTIAN LOUBOUTIN JUMPING Beige CrossStrap PatentLeather Stilettos 6 Christian Louboutin Pumps Beige US6.5 USED 202409M Christian Louboutin Follies Lace 100 Multicolor Heels Pumps (Size 37.5) Christian Louboutin Nichel Laminato Leather Marie Pli 100 Sandals Size 5/35.5 Christian Louboutin Iriza Black Leather Pumps Heels Men’s Louboutin Shoes Sneakers Wingtip Multicolored Leather – Size 44 / US 11 Christian Louboutin Calfskin Altapoppins 150 Beige Pumps Ebcrdu 144030004735 christian louboutin Wedges Christian Louboutin Pumps Heel Pointed Toe Patent Leather Silver EU38/US8 RARE Christian Louboutin Pigalle 120 High Heel Pump Sz 39 or 7.5- Sold Out!! Christian Louboutin Hot Chick Stud Scallop 100 Black Suede Pump 41 Retail $845 Women 6.0US Louboutin Strap Open Toe Heel Christian Louboutin Iriza 100 Pink Satin Pumps Heels (Size 39.5) Christian Louboutin Slingback Pumps Black Patent Leather Shoes Womens 36.5 Christian Louboutin Swarovski Crystals Strass Purple Iriza Pumps Christian Louboutin | White Leather Silver Spiked Slip-on Yacht Loafers, Size 5 Christian Louboutin Grey Snakeskin Lady Daf Platform Pumps Size 36.5 Eb0524rxsa CHRISTIAN LOUBOUTIN VERO CUOIO 38.5 MUTED PINK LEATHER HEELS CHRISTIAN LOUBOUTIN womens shoes 38.5 Christian Louboutin Sneakers Shoes High-cut Studs Blue White Auth Japan Women 5.5US Christian Louboutin Long Boots Braided Suede Black christian louboutin sneakers men 42 1/2 Louboutin Christian Size 37/5 Christian Louboutin Clare Naturalle Cork Slingback Pumps louboutin men shoes black low 40.5 Women 7.0US Christian Louboutin Floral Pumps From Japan Women 6.0US Christian Louboutin Wedding Shoes Christian Louboutin Ishtar Botta Black Suede Christian Louboutin Geo Navy Stripe Red Spike Canvas Pumps Size IT 38 Christian Louboutin MISS SAB 55 Suede Block Heels Pumps Shoes Black $795 Women 6.5US Christian Louboutin Pumps High Heel Studded Leather From japan Christian Louboutin Women’s So-Jane Patent Sling Back Leather Off White/Cream Go Christian Louboutin Black Leather Rolondo Slingback Pumps EU 36.5 US 6.5 Christian Louboutin Red Bottom women high heel shoes size 10.5 Christian Louboutin Women’s Sz 37 US Kate 100 Nude Patent Pointed Heels Christian Louboutin Pigalle Follies 39 Eu Graffiti 100 Patent Heels Women 7.0US Christian Louboutin Sneakers CHRISTIAN LOUBOUTIN Black Leather Pump JENLOVE ALTA Peep Toe Platform Heels 36.5 Christian Louboutin Pigalle Plato Black Napa Leather Pumps Size 38 Christian Louboutin Black Patent Leather Cross Cross Spikes Pumps 39 IT Christian Louboutin Decolette 100 Patent Nude 39 Women 5.0US Df50 Christian Louboutin High Heels Enamel Red Black From japan Christian Louboutin NWD Hot Chick Slingback 100 Heels Size 38.5 US 8.5 in Lilac Christian Louboutin Nude Patent So Kate 85 Pointed Toe Pumps Size 39 Christian Louboutin Women Hot Chick Scallop 4″ High Heel Pumps Leopard Sz 39 NIB Christian Louboutin Dolly Patent Pumps Pre Owned Women Size US 9/EU 39 FREE SHIP Christian Louboutin Nude Margarita 100 Butterfly Crystal Heels EU 40 Authentic Christian Louboutin Patent Leather Pumps Women’s Size 39 US 9 Black Christian Louboutin Red Patent Leather So Kate Heels 37.5 Women 7.5US Pumps Christian Louboutin Petanco From Japan Christian Louboutin Black Red Ombree Patent leather Pumps Christian Louboutin Just Nothing Patent PVC Sandal authentic christian louboutin Luly Open Toed Mary Jane Pumps Slight Damage Christian Louboutin Size 39 Silver Crystal Embellished Pigalle Follies Pumps Auth Christian Louboutin Bianca black leather 140 heel platform pumps 40 EU Women 7.0US Christian Louboutin Sandals Heel Light Blue Gold 24Cm Christian Louboutin Viva Vida Low Top Sneakers Size 41/ US 8 Blue Christian Louboutin So Kate Nude Patent Leather Pumps Shoes Size 37 Christian Louboutin Silver Striped Sandal Heels 40 christian louboutin heels size 41 Christian Louboutin Teal Suede Gold Trim Mid High Heel Pumps W Bag 39.5 US 8.5 Christian Louboutin Beige Patent Leather RonRon Zeppa Wedge Pumps Size 39.5 US 9 Christian Louboutin Nude White Bow Pumps 38.5 IT AUTHENTIC Christian Louboutin Declic 120 Christian Louboutin Black Patent Leather Bianca Pumps Size EU 38.5 Women 6.5US Christian Louboutin Platform Enamel Open Toe Pumps Black Christian Louboutin Pump Heels 41 Pigalle Black Patent Leather US 11 Authentic christian louboutin heels 39 Christian Louboutin Multicolored Floral Leather Printed Pumps – Size 37 christian louboutin heels size 41 CHRISTIAN LOUBOUTIN BLACK PATENT LEATHER POINTED TOE PUMPS SIZE 5 EU 35 Christian Louboutin Pumps Heel Leather Red EU35/US5 18761c CHRISTIAN LOUBOUTIN Suede Degrastrasss 100 Pumps 37.5 Version Rose Indien Women 6.5US Christian Louboutin Lace Up Sandals Wedge Sole Made In Italy Christian Louboutin Pumps Heel Pointed Toe Black EU36/US6 AK24110209 Christian Louboutin Louis Junior Orlato Sneaker EU 40 US 10 Gold Satin Low Top Christian Louboutin Lip Satin Lipstick ** PLUMINETTE (T) Mens Pullover Fleece Hoodie