1000 WATTS 10.5 V-28 V DC MPPT GRID TIE INVERTER AC 220V (190 V-260 V)1000w

$165.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store hi_iq
(41059) 96.6%,

Location: Point Roberts, Washington
Ships to: US,
Item: 131716507938

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Inverter Technology:Microinverter
System Configuration:Grid-Tie
Power Source:Solar
Color:Silver
MPN:Does Not Apply
Recommended Environment:Indoor/Outdoor
Protection Properties:Anti-island Protection,Low Voltage Protection,Overcurrent Protection,Spike Protection,Surge Protection
Current Output:AC
GreenergyStar:GreenergyStar
Product Type:Inverter
Voltage Output:120

– Unique and intuitive display design – LED cycling in circular formation – Represent electric meter spinning backward and power is being output to the grid – Smooth motion GreenergyStar 1000W MPPT Grid Tie Inverter AC Voltage Range 220 v For Solar & Wind Hybrid Systems MPPT to Enhance Power Output by 30%! Introduction Of all the different kinds of renewable energy available today, solar and wind are the two most popular ones favored by homeowners due to their relatively easy implementation and wide range of suitable sites. However, these green energy sources do not come with a plug to connect to a wall socket (the grid). Even if they do, there are different parameters for each type of renewable energy and interconnecting with the grid would present a challenge. Fortunately, grid-tie inverters have been invented to solve this interconnection problem. “What is grid-tie inverter?” you asked. A Grid-Tie Inverter is a device that that can transform 12V DC electricity (i.e.: Solar Panels, Wind Turbine, Battery Storage) into 220V AC power that can be directly injected into your utility’s electricity network (the power grid). However, the down side is, most inverters available in the market today are in the high output (3000W ~ 8000W) category. Their prices range in the thousands and it is just too much of an upfront cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables “But I am a small home owner. I would like to start small and test things out and perhaps expand my system in the future if I have the money. I would also like to DIY to cut down on cost and have a project that I would be proud to work on… isn’t there an easier and more affordable way to do this?” Yes, there is. With our latest developed micro grid-tie inverter Grid Power 3 feature the popular plug and play function, you will be connecting your renewable energy sources into the grid and join the green movement in no time. Start small. Think Big. A Greener future awaits. What’s New in the 3rd Generation? So you ask, “What’s new in this third generation?”. Well, by reaching the 3rd generation, we have again improved the power output by incorporating Maximum Power Point Tracking (MPPT) technology to harvest more solar energy. The inverter has also utilized better surge protection components to shield against voltage spikes and energy surges. In addition, this inverter will work with our SolarWind Hybrid RX charge controller to allow wind energy input. Here are the high lights: Maximum Power Point Tracking (MPPT): What is Maximum Power Point Tracking (MPPT)? MPPT is a techinque we implemented to get the maximum possible power from a solar panel. When trying to characterize the output of a solar panel mathematically, it can be represented by an IV-Curve (shown below). The equation for Power is P = IV. Where I is the Current, V is the Voltage, and P is the possible output Power. Each point on the curve is a possible combination for output power and our goal is to find the best combination to obtain maximum power. In simple terms, we are trying to get the biggest rectangle to fit under this so called IV-Curve, the bigger rectangle we can fit, the more power we get. Below are graphs to help you understand the idea better. This is a comparison between inverters with and without MPPT on an 85W solar panel. Please note that different solar panels will have slightly different IV-Curves. No Tracking Vs Tracking Figure 1 No MPPT, with voltage fixed 17.5V P = 17.5V x 4.6A = 80.5W Figure 2 With MPPT, amount of current and voltage to draw are calculated P = 17V x 4.95A = 84.15W As we can see, Figure 2 is able to 84.15W with MPPT while in Figure 1, we can only get 80.5W. This is 4.5% increase in power output. Why do we care? Because solar panels are still quite expensive these days, and the increased power output will directly affect our return on investment (ROI). In addition, depending on weather, time of the day and amount of solar irradiation the panel receives, the IV curve will move along the Y-axis to reflect the possible increase / decrease in potential power output, and cause the maximum power point to shift along as well. Coming up are illustrations to visualize this idea. IV-Curves Under different weather conditions Figure 3. Sunny, Clear Sky days in Summer 600 ~ 1000 W/m2 No MPPT MPPT Power 80.5W 84.15W Color Red & Yellow Yellow& Green Percent N/A +4.5% Figure 4. Scattered Clouds or Partly Cloudy days in Summer 300 ~ 600 W/m2 No MPPT MPPT Power 42.0W 46.4W Color Red & Yellow Yellow& Green Percent N/A +10.5% Figure 5. Cloudy or fog days, dawn or dusk in Summer 100 ~ 300 W/m2 No MPPT MPPT Power 5.25W 14.25W Color Red & Yellow Yellow& Green Percent N/A +171% Figure 3 – 5 illustrate the power gain in different weather condition with MPPT compare to a non-tracking inverter that locks voltage at 17.5V. While 17.5V is randomly chosen, it does show what would happen in real life when there is not MPPT. Studies have shown, by making use of MPPT, there will be an average of 30% increase in power production. Since the maximum power point is a variable, we have implemented a tracking algorithm that utilizes the micro processing power of our inverter to calculate the optimum voltage and current to maximize our energy harvest. Increased Power Rating: In 2008, when we designed the first generation inverter, what we had in mind was an inexpensive device to allow the public to have a chance to test out renewable energy production and promote the green movement at an affordable price range. As people’s environmental awareness increased over the years, the demand for bigger systems also increase. Therefore, once again, the power of this inverter has increased to accomodate market demand. Compatibility with GreenergyStar SolarWind Hybrid RX Charge Controller: Want to grid-tie a wind system? Then it is time to get a charge controller. The GreenergyStar SolarWind Hybrid RX is designed to work with our grid-tie inverters for solar and wind applications. It offers the protection needed by inverters against volatile storms and unstable inputs. Compatible with solar panels, 12V AC / DC wind turbines, Southwest Windpower’s Air-X, 403, 303 and SunForce’s 600W wind turbines. Enhanced Safety: In this generation, we have utilized better surge protection components to shield against potential energy surges during connection or disconnection to the grid. Voltage spikes in night time or stormy weathers are eliminated with higher grade electronics. The circuit board has been completely redesigned to accommodate to the UL 1741 Standard and the status of our UL application is currently pending. New Features: Maximum Power Point Tracking (MPPT) – optimize power output Enhanced in power output compare to second generation inverters Unique and intuitive LED display design to reflect power output rate Allow MORE types of power source to be connected with SolarWind Hybrid RX Charge Controller (ie: Air-X, 12V battery, and etc.) General Features: Grid-tied – sell green energy back to the utility at a premium rate Plug and Play design, simple and easy. No hard-wiring or rewiring of existing electronics Island Protection: Inverter will shut down during black outs. Synchronize with grid and generates pure Sine Wave Reverse polarity protection Stackable (connect in parallel for higher output) Maximum input power: 1000W (rated at 16.6V and 60A) System Voltage: 12V Nominal (see input / output sections for range) 3x External 30A fuse for easy maintenance Internal diode to prevent reverse current to solar panels or wind turbine at night High quality finned aluminum casing to protect internal electronics and act as heat sink to dissipate heat Microprocessor based control electronics to regulate input and output Installation: Connects directly to Nominal 12V Solar Panels Nominal 12V AC or DC wind turbine installations with battery will require respective charge controllers and dump loads. Recommend using the GreenergyStar SolarWind Hybrid RX charge controller to monitor charging and discharging Connect the included cable to the inverter, and then connect the other end to a wall socket. Warning! Reverse polarity in input will blow fuse and possibly damage the inverter. Damages caused by reverse polarity is not covered by the warranty Output Specifications: Model Grid Power Maximum AC Output Power 1000W AC Voltage Range 190V ~ 260V Auto Switching Frequency 45Hz ~ 65Hz Over current protection Yes, firmware controlled Total Harmonic Distortion (THD) <5% Power Factor 0.99 Anti Island Protection Yes, Inverter will disconnect from grid during black out Output Current Waveform Pure Sine Wave Input Specifications: Starting Voltage 12.8V Drop out Voltage 10.5V Operating Voltage Range 10.5V ~ 30V Standby Voltage 8V ~ 10.49V Shut Down Voltage <8V Withstand voltage 35V (anything above will damage inverter) Maximum Input Current 60A Over current protection 90A Fuse Reverse Polarity Protection Above 90A will blow fuse. Under 90A will heat up internal electronics. Disconnect immediately do avoid damage Stand-by power consumption <1W Mechanical Specifications: Operating temperature range -20'C - 60'C Weight 2.04kg 4.5lb Dimension (L x W x H) 28.0 x 16.5 x 5.4 cm 11.0 " x 6.5" x 2.1" Mounting Wall Mount at base AC Cable Length 1.5m Cooling Convection cooled with fan Casing High quality finned aluminum to act as heat sink for fast heat dissipation Display 6 Green, 1 Orange and 1 Red LED What are included: 1X Grid Power grid-tie inverter 1X 1.5m North America Standard AC Cable Instruction manual Warranty: We will warrant this unit against any manufacture defects or workmanship for 1 year from the date of purchase. This limited warranty specifically excludes damage caused by improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification.This warranty is not transferable. In the event of a claim against this warranty, the seller's obligation, and the claimant's sole remedy, shall be replacement of the product, repair, or refund of the original purchase price excluding any shipping and handling fees. All shipping and handling fees going both ways are responsible by the buyer. NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE - SOLAR & WIND Terms & Conditions Bidding this auction means that you agree with the following terms & conditions. All pictures and descriptions are subjected to change without notice. Items may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors. Payment Total payment = winning price + shipping & handling Insufficient payment will be charge extra US$0.50 to compensate the Paypal penalty fees. Shipping & Handling Total shipping = Base S&H + Combine S&H ( for each additional item ) a) Charge the highest shipping cost for the first item. b) Each additional item is 1/2 of its Base S&H 1. Combine shipments are only available on the condition of a SINGLE PAYMENT. Auctions that are paid separately will NOT be shipped in combo and therefore, they are not qualified for shipping discounts. 2. We ship within 48 hours after payment is received and confirmed. Please allow up to 5-10 BUSINESS DAYS for item(s) with a physical address sending to the 48 states of United States & Canada. For international bidders, the shipping time varies with respect to your location. 3. Bounce backs due to incorrect shipping address will result in setback on deliveries. It is the buyer's responsibility to repay the shipping & handling fees. 4. We are not responsible for any loses or damages resulting from shipping. Return & Refund Policy No refunds after 30 days Shipping & handling & other service fees are NOT refundable All returned items must be in original packing. Items that are used/ damaged/ deformed or altered in any ways will not be accepted. A 20% restocking fee will be charged on all refunded items. E-mails E-mails are usually answered within 2~3 business days in priority order. Spams and mass e-mailing will be deleted without slightest glance. E-mails with virus or anything subjected to hacking are automatically deleted.

Frequently Asked Questions About 1000 WATTS 10.5 V-28 V DC MPPT GRID TIE INVERTER AC 220V (190 V-260 V)1000w in My Website

tonisaptoadi.com is the best online shopping platform where you can buy 1000 WATTS 10.5 V-28 V DC MPPT GRID TIE INVERTER AC 220V (190 V-260 V)1000w from renowned brand(s). tonisaptoadi.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 1000 WATTS 10.5 V-28 V DC MPPT GRID TIE INVERTER AC 220V (190 V-260 V)1000w on tonisaptoadi.com?